Princess presents its new X95 - A new concept from Princess
Photo: princessyachts.com
22

Princess presents its new X95 - A new concept from Princess

2020-07-29

Automatisch übersetzen:

The volume in the boat is 30 percent larger than in similar boats of the same size. Flybridge extends over almost the entire length of the boat.

To be sure that the interior layout works as intended, Princess builds up its interiors for new boats in plywood in full scale, before the boat begins to be built. All for the layout to work as well as possible.
They also put a lot of energy into making the layout feel comfortable during long trips.
Fore the X95, it was decided to make better use of the long foredeck that is often found on motoryachts.
The hull also differs from previous models. The whole concept for the layout is new to Princess, but they still wanted a recognition factor in the boat, it should be seen that it is a Princess.
The boat is equipped with a stabilizer for comfortable longer trips over open water.
The boat is made for long distances, at lower speeds up to 2000 miles. The hull shape is optimized to make low resistance in the water, which contributes to the long range.
They have managed to sell a number of boats even before the first boat was ready, they are now working on hull number 2.

DIMENSIONS
Length overall: 95ft 6in (29.1m)
Beam: 22ft 3in (6.77m)
Draft: (at full load) approx. 6ft 7in (2.01m)
Displacement: approx. (half load) 104 tonnes
Fuel capacity: 2,948 gal/3,540 US gal/13,400l
Water capacity: (incl. calorifier) 396 gal/475 US gal/1,800l
Hot water calorifier: 45 gal/54 US gal/205l
Black water tank: 158 gal/190 US gal/720l

ENGINE
Twin MAN V12-1900 (2x1900mhp)
Speed range: 24-26 knots†

Contact

info@7zea.com

Social

7zea.com on facebook

Land ändern